Welcome To Hercules Trommels
Hercules Trommels
Welcome to our Vari-Grid page at
Hercules Trommels.

Hercules Trommels are the solution for Quarry overburden or the clean up of blasted, ripped or as dug material and the removal of fines prior to crushing. With no pegging due to it's self cleaning action contaminated, wet, dry or dirty material can be processed. Barrel openings suitable for sizing, gabion, riprap or sea defence stone.

Dealers / Agents
Stelex are after Dealers / Agents to take on our range of Hercules Trommels. If you are interested then please contact us.


The Vari-Grid system is an alternative to the heavy duty Hercules Trommel range of machines. The system is quickly and easily moved and set up using a wheel loader. Once set up on the quarry floor it is fed by the same loader and fines and oversize can be readily removed and placed into two separate sizes. Wing plates come as standard to help direct the material over the bars and prevent spillage. 

Bar spacing’s are easily adjusted and can be set between 100mm and 400mm in 50mm increments with the bars easily managed by two men.

As an alternative to working on the quarry floor they can be set up over a quarry bench to give increased stockpiles without the need to move the material. They can also be set up in multiple configurations in order to screen more than one size.

The range is available in three sizes;
Vari-Grid CAT Loader
Feed Height
35 962 3,500 2,950
39 972 3,900 3,150
43 980 4,270 3,350
Vari-Grid 43 Vari-Grid Logo Vari-Grid
Bullet Stelex Engineering Ltd, Unit 2 Elms Lodge Barns, Melton Road, Barrow Upon Soar, Leicestershire, LE12 8HX, England. Copyright Stelex Engineering Ltd 2018.